2 1/4″ Panel Mount Chronometer, Aircraft powered, 14V/28V Internal Lighting
$616.00
Category: Flight Instrument
Description
2 1/4″ Panel Mount Chronometer, Aircraft powered, 14V/28V Internal Lighting
The Astrotech LC-2 Chronometer is a precision clock-timer offering reliability at an economical cost. This chronometer provides time, date, and elapsed timer with a hold or time-out feature.
- Liquid Crystal Display – excellent sunlight readability
- Internal lighting
- Four digit display
- Date display
- Selectable 12 or 24 hour clock
- 24 hour elapsed timer
- Three button operation
Related products
2″ Lighted Digital Electric Horizon Gyro, 9-32 volt, TSO
$2,332.00
ELECTRICAL REQUIREMENTS
- Operating voltage: 9 to 32VDC
- Current draw: 0.20 A Max
- Circuit breaker: 2 amps
- Length: 1.22 in. max.
- Width: 3.37 in. max
- Height: 3.37 in. max
- Weight: 6.75 oz
- Length: 1.22 in. max.
- Width: 2.75 in. max
- Height: 2.4 in. max
- Weight: 4.75 oz
- MATING CONNECTOR: (MS3116E8-4S) & screws included
- CERTIFICATIONS: TSO-C4c, TSO-C113a, DO-160G, and DO178B Level C
- EASA SPECIFICATION CONFORMANCE: ETSO-C4c and ETSOC-113
3″ Mini6 Digital Multifunctional Indicator, 9-32 volt, TSO
$2,860.00
- Operating voltage: 9 to 32 VDC
- Circuit breaker: 1 Amp
- Current draw: 0.35 Amp max (14VDC), 0.20 Amp max (28VDC)
- Length: 2.3 in. max
- Width: 3.37 in. max
- Height: 3.37 in. max
- Weight: 8.3 oz. max
- Battery: Rechargeable LiPo (1.85 Wh)
- Max Indicated Airspeed: 300kts
- Vertical speed range: ± 9,000 feet/minute
- Altitude range: -5,000 - +33,000 feet
- TSO-C4C Bank and Pitch Instruments
- TSO-C113a Airborne Multipurpose Electronic Displays
- TSO-C3e Turn and Slip Instrument
- TSO-C6e Direction Instrument, Magnetic (Gyroscopically Stabilized)
- TSO-C2d Airspeed Instruments
- TSO-C10c Pressure Altimeter System
- TSO-C8e Vertical Velocity Instruments (Rate-of-Climb)
- Environmental Certification: (DO-160G)
- Software Certification: (DO-178B)
Autopilot Directional Gyro, Lighted, TSO
$2,499.00
Autopilot Directional Gyro, TSO
$2,284.00
G5 Electronic Flight Instrument Kit with LPM for Certified Aircraft
$73.00
- Electrical: 14 or 28 VDC aircraft power
- Unit size: 3.4"W x 3.6"H x 3.0"D (86.4 x 91.4 x 76.2 mm)
- Weight: 13.3 oz (377.0 g), unit
- Display size: 3.5" diagonal (88.9 mm diagonal)
- Display resolution: 320 x 240 pixels (QVGA), LED backlit color LCD
- Receiver: High-sensitivity GPS
- Maximum indicated airspeed: 300 kts
- Altitude range: -1,400 – +30,000 feet
- Vertical speed range: ± 20,000 feet/minute
- Pitch/roll range: ±360°
- Backup battery: Rechargeable lithium-ion
- Battery life: Up to 4 hours
SAM – MD302 2-inch Standby Attitude Module
$8,052.00
- Power Input: 10-32 VDC; 6W nominal, 25W max
- Output: ARINC 429 (see manual for specific labels)
- Operating Range:
- Attitude: 300° per second pitch, roll and yaw (max)
- Altitude: -1,500 to +55,000 ft (-457 m to 16,764 m)
- Airspeed: 20 to 500 knots (23 to 575 mph) (37 to 926 kph)
- Vertical Trend: 6 second time frame
- Heading: Displayed via ARINC 429 input (external interface dependent)
- Units of Measure:
- Altitude: Feet or meters
- Barometric Setting: Inches of mercury, millibars
- Airspeed: Knots, miles per hour or kilometers per hour
- Panel Tilt: Configurable: -90° to +90° pitch
- Panel Roll: Configurable: -5° to +5° roll
- Lighting:
- 5, 14 or 28 VDC external input or internal photocell
- Programmable dimming curve
- Pilot Interface: 16-detent, push and turn knob
- Weight: 1.6 lbs (0.73 kg)
- Battery:
- Rechargeable, field-replaceable, internal battery
- Technology: Nanophosphate® lithium-ion
- Run time: 60 minutes minimum when fully charged and properly maintained
- Mounting: Front panel mounted
- Mating Connectors:
- Mid-Continent P/N 9017646 kit contains custom DB15 connector with configuration
- module, pitot and static connectors
- Certification:
- FAA TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- ANAC TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- EASA ETSO certified to C2d, C3d (incomplete), C4c, C10b, C106, C113, C179a
- RTCA DO-178B and DO-254 Design Assurance Level (DAL) A
- RTCA DO-160 and RTCA DO-311 qualified
