EMSKIT-J33 Jabiru 3300 Kavlico Solid-State Kit, Includes All Sensors & Harnesses

Dynon has switched their source of engine pressure sensors to solid-state Kavlico sensors starting January 2, 2012. Kavlico is a US company that has been making high quality sensors for over 50 years, and is well known in the aviation industry.

Engine sensor kits will include these new solid-state sensors, and we have optimized the sensor ranges to better match engine pressure ranges offering greater resolution and accuracy. (The older sensors and kits are still available if needed.)

These solid-state sensors do require different wiring, with a third wire needed for 5-volt power. The Kavlico Pressure Sensors:

All sensors are threaded 1/8-27 NPT.
All sensors may be used for any liquid.
The following shows the most common usage.

	EMSKIT-
Item	L4C	L4F	L6C	L6F	RTX	J22	J33
Engine Sensors
EGT, Hose Clamp 1.00-1.75”, Jabiru						4	6
EGT, Hose Clamp 1.00– 2.25”	4	4	6	6
CHT, Bayonet 3/8-24 UNF	4	4	6	6
CHT, 12 mm Ring Terminal						4	6
MAP , 0-60 In Hg, 1/8” hose)	1	1	1	1	1
Oil Pressure, 1/8-27 NPT, 0-150 PSI	1	1	1	1
Oil Temperature, 5/8-18 UNF	1	1	1	1
Fuel Pressure, 1/8-27 NPT, 0-30 PSI, Carbureted	1		1		1	1	1
Fuel Pressure, 1/8-27 NPT, 0-80 PSI, Fuel Injected		1		1
Carb Air Temperature, ¼-28 UNF , -50º to 150º	1		1
Amps Shunt, 0 – 60 Amps	1	1	1	1	1	1	1

Wiring/Harnesses
EGT, 2 cylinder, 6′ long					1
EGT/CHT, 4 cylinder, 6′ long harness	1	1				1
EGT/CHT, 6 cylinder, 6′ long harness			1	1			1
Engine sensor main wire harness	1	1	1	1	1	1	1

Notes					A	B	B
A) Uses CHTs, Oil Temperature, Oil Pressure and RPM sensors supplied with the engine B) Uses Oil Pressure and Oil Temperature sensors supplied with the engine C) OAT Probes are included with SkyView SV-ADAHRS-200/201. They should be ordered separately for D10/D100 Series EFIS and EMS instruments.