70509 Series Flashing Beacon
$431.00
- Drawing Number: 70509
- Weight: 0.27 lbs. (122gm)
- Height: 3.75 (95mm)
- Diameter: 2.65 (67mm)
- Power Consumption: 2.7 amps @ 14 VDC, 1.3 amps @ 28 VDC
Description
Whelen 70509 Series Flashing Beacon
Self-contained halogen flashing anti-collision light with the same mounting pattern as the factory installed beacon on single engine Cessna’s 1967 & later. Available in three different lens colors, Aviation Red, Aviation White and Split Aviation Red/White. When used in conjunction with the model 50519 mounting adapter, it can replace rotating beacons with the 3-3/4 dia. mounting hole. Note: Not recommended for installation on helicopters or twin engine aircraft.
The Model 70509 can be installed as a replacement on Cessna Aircraft (1967-1979), on most general aviation aircraft, homebuilts, and ultralights. The unit is completely self-contained, no separate flasher power pack required.
- Drawing Number: 70509
- Weight: 0.27 lbs. (122gm)
- Height: 3.75 (95mm)
- Diameter: 2.65 (67mm)
- Power Consumption: 2.7 amps @ 14 VDC, 1.3 amps @ 28 VDC
Related products
MAXDIM Single Light Intensity Control Unit, with Ring Terminals, by Seaton
$300.00
- Weight: 0.58 oz (16.6 g)
- Dimensions: 1.25" diameter
- Voltage Range: 12 to 35VDC
- Max Current: 15A
- Controlled Output: 0 to 12-35 VDC, 0 to 15 A
- Channels:
- Capacity:
- 180 watts @ 12 VDC
- 360 watts @ 24 VDC
- 420 watts @ 28 VDC
- 525 watts @ 35 VDC
- Install with standard supplied solderless ring lug terminal
- Potentiometer rotation: 270°
- Rotational life: 500K turns
- Operating temperature range: -30° C to +65° C
- Internal temperature protect: +85° C
- Storage temperature: -40° C to +100° C
- Maximum internal temperature: @12.5A +15° C
- Enclosure material: Bayer FR 110 Resin meets UL 94
- Flame rating: V-2 (0.03in) V-0 (0.059in) 5VB (0.098in) 5VA (0.13in)
- RTCA/DO-160E Qualified
- FAA PMA STC SA01800SE
- Capacity:
MAXPULSE Landing Light Controller, with spade connectors, by Seaton
$300.00
- Weight: 1 oz
- Diameter: 1.25"
- Voltage range: 12 to 35VDC, up to 700 watts total
- Max current: 10 A per circuit
- Circuits: 2
- Capacity per circuit:
- 120 watts @ 12 VDC
- 240 watts @ 24 VDC
- 280 watts @ 28 VDC
- 350 watts @ 35 VCD
- Installed with standard supplied solderless crimp ring lug terminals
- Operating temperature range: -30° C to +65° C
- Internal temperature protect: +85° C
- Storage temperature: -40° C to +100° C
- Maximum internal temperature: @ 10 A +25° C above ambient
- Enclosure material: Bayer FR110 resin meets UL 94
- Flame rating: V-2 (0.03in) V-0 (0.059in) 5VB (0.098in) 5VA (0.13in)
- Full STC/PMA
- RTCA/DO-160E Qualified
