CGR-30P-4-B Primary Engine Monitor, 4-Cylinder Basic Package with RPM, EGT/CHT Bar Graph, Fuel Flow, OAT & Volts

Electronics International CGR-30P-4-B Primary Engine Monitor
4-Cylinder Basic Package with RPM, EGT/CHT Bar Graph, Fuel Flow, OAT & Volts

CGR-30P-(4 or 6)-Basic – This is a pre-built & configured package with no add-ons or exchanges

Download the Redline Order Form Here

Download the Approved Model List Here – Approved for Many Aircraft

FAA Approved Primary Replacement

• Remove your old engine instruments, including RPM, EGT/CHT, Fuel Flow, Volts, OAT!
• Upgrade your aircraft panel with the best engine analyzer available.
• CGR-30P fits into your existing 3 1/8″ hole (remove your old tach).
• Engine Data Converter (EDC) accepts all inputs. Only 2 wires run to the back of the instrument.
• All monitored functions are stored up to three times per second.
• Up to 1,500 most recent flights stored, downloaded via a USB port.

Included: RPM, Fuel Flow, EGT/CHT Bar Graph, Fuel Remaining, Volts, OAT, Tach Time, Local Time, Zulu Time, Flight Timer, Fuel Used, GPS/Fuel Flow Data, External Caution & Warning, and Data Recording.

CGR-30P Main Screen
The Main Screen displays the Tachometer and Fuel Flow in large analog arcs at the top of the instrument, providing immediate and quick reference values. The digital display provides accuracy in monitoring engine functions.

The CGR Main Screen also features a complete, primary replacement EGT/CHT Bar Graph Engine Analyzer. Each cylinder is monitored by the CGR. If any EGT or CHT temperature rises above or below programmed limits, the CGR provides an immediate alert. The EGT/CHT Bar Graph Analyzer features both Lean-of-Peak and Rich-of-Peak Modes for easy engine leaning. The CGR-30P will let you know as each cylinder peaks, at what temperature each cylinder peaks, and how far below Peak Temperature each cylinder is operating.

To the right of the EGT/CHT Bar Graph Analyzer, the CGR-30P displays Fuel Remaining, Volts, and OAT.

EGT/CHT Bar Graph
The CGR-30P features a state-of-the-art, full-color bar graph to assist with ROP/LOP leaning. Additionally, the bar graph provides both “normalized” and digital readout screens. No other bar graph in the industry comes close to providing the number of options the CGR-30P offers.

The Bar Graph can be easily “Normalized” to create a baseline from which to monitor in-flight engine temperature changes. When Normalized, all EGT or CHT bars will be displayed as equal in height. If any cylinder’s EGT or CHT changes in relation to the other cylinders, that cylinder’s bar height will no longer be shown at the same height as the others. Such information can be an essential indicator of engine problems.

Lean-of-Peak Mode
For Lean-of-Peak Operations, the CGR-30P informs the pilot as each cylinder peaks, at what temp each cylinder peaks, and how far from peak temp each cylinder is. For quick reference, every cylinder’s peak information is constantly displayed and “tattletale bars” are shown above each cylinder, indicating where each cylinder peaked. Fuel Flow is displayed during the entire leaning process to assist in finding the optimal fuel-to-air mixture.

Rich-of-Peak Mode: The number of degrees below Peak EGT is displayed on the first cylinder to Peak. Fuel Flow is displayed during the entire leaning process to assist in finding the optimal fuel-to-air mixture.

Fuel Management

• Displays ‘Estimated Fuel Remaining Based on Fuel Flow’.
• Displays ‘Fuel Used for Flight’ and ‘Since Last Fill-Up’.
• May enable you to extend your flight time using a number of fuel management tools.

GPS Interface

• Ties into panel or yoke-mounted GPS.
• Displays distance and time to empty.
• Stores GPS data in its recorded flight log.

The Fuel Data Screens provide six sets of data based on Fuel Flow and GPS information. This data includes Range, Distance to Destination, Range After Reaching Destination, Fuel Remaining, Fuel to Destination, Fuel Reserve, Time to Empty, Time to Destination, Time Reserve, Fuel Used for the Flight, Fuel Used Since Fuel Was Added, Economy (MPGs) and Total Fuel Onboard. Much of this data depends on an RS232 connection to your GPS.

Data Recording

• Records all functions, every flight, up to 3 times per second.
• See potential issues before they become major problems.
• Easily chart recorded data using EGView software.
• Quickly download data with a USB flash drive.

This screen allows you to download Flight Data to a USB flash drive and set the Data Sample Rate. The Data Sample Rate is the time interval between recorded data. The CGR-30P can record up to 1500 flights before it records over the oldest flight first. The USB port may be found mounted in the instrument panel or hanging under it. Flight Data is recorded and downloaded in a comma delimited format. This allows the file to be ported directly into Excel.

• Dimensions: 3.25” x 3.25” x 4.45” Deep, 3 1/8” Flush Mount
• Weight: 1.1 Pounds (Instrument Only)
• Power Requirements: 7.5 to 30 Volts, Typical: 0.2 amps @ 12 Volts
• Display: Active Matrix, Sunlight Readable
• Backlight: Fully Dimmable for Night Flights
• USB Port: Data Download and Software Updates
• Internal Storage: Up to 1,500 most recent flights stored. All monitored functions are stored up to three times per second. Recorded flight data can be easily downloaded via USB port.
• Certifications:
  • FAA STC’d as Primary Replacement
  • FAA TSO’d to DO-160G
  • FAA DO-178 Level C
  • Transport Canada Civil Aviation (TCCA) Validated STC
  • European Aviation Safety Agency (EASA) Validated STC