“tailBeaconX ADS-B OUT TPX & AV-30-C EFIS Certified Bundle” has been added to your cart. View cart
Digital VOR and Localizer Indicator with ID, 2.9″w x 1.7″l x 1.5″d, FAA-PMA Approved
$580.00
Category: Flight Instrument
Description
Digital VOR and Localizer Indicator with ID, 2.9″w x 1.7″l x 1.5″d, FAA-PMA Approved
Indicator Features:
- Automatic VOR Position orientation
- Instant To/From switching
- Alpha-numeric station ID w/M903ID
- Localizer deviation & course centerline digital filtering & signal processing
- Sunlight readable incandescent display
- Automatic display dimming
- Off FLAG “-“
- Panel mount (1.65″ x 2.9″) or 2-1/4″ inst
- Serial ASCII output
FAA Approved Model List.
If your airframe is not shown on the list, it is recommended a FAA form 337 should be filed with the local FSDO.
- Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35-33, and 35-133
- Schweizer Model 269D
- Diamond Aircraft Model DA20-A1
Related products
2″ Lighted Digital Electric Horizon Gyro, 9-32 volt, TSO
$2,332.00
ELECTRICAL REQUIREMENTS
- Operating voltage: 9 to 32VDC
- Current draw: 0.20 A Max
- Circuit breaker: 2 amps
- Length: 1.22 in. max.
- Width: 3.37 in. max
- Height: 3.37 in. max
- Weight: 6.75 oz
- Length: 1.22 in. max.
- Width: 2.75 in. max
- Height: 2.4 in. max
- Weight: 4.75 oz
- MATING CONNECTOR: (MS3116E8-4S) & screws included
- CERTIFICATIONS: TSO-C4c, TSO-C113a, DO-160G, and DO178B Level C
- EASA SPECIFICATION CONFORMANCE: ETSO-C4c and ETSOC-113
Altimeter, 0-35,000 ft in Hg, TSO
$1,865.00
AV-30-C EFIS Display, FAA-PMA
$2,156.00
- Input Power Nominal: 6 Watts (0.5 Amps @ 12VDC)
- Input Power Max: 12 Watts (1.0 Amps @ 12VDC)
- Required Circuit Breaker: 2 Amp
- Operation on Battery: 2 Hours Typ @ 20°C / 30 Minutes Min @ -20C
- Physical Attributes
- Mounting Configuration: 3 1/8” Round Instrument Hole
- Dimensions wo/Connector: 3.38 x 3.38 x 1.6 Inches
- Weight: 0.50 Lbs.
- Electrical Connector: 15 Pin Male D-Sub
- Pneumatic Connectors: ¼" OD Quick Connect
- Mounting: (4X) #6-32 Machine Screws
- Case Material: Billet Aluminum
- Environmental
- Operating Temp: -20°C to +55°C
- Storage Temp (48 Hrs): -30°C to +80°C
- Humidity (48 Hrs): 90% RH
- Display
- Diagonal Size: 3” Circular
- Contrast Ratio (Typical): 500
- Brightness (Typical): 1000 cd/m2
- Viewing Angle Left/Right: 60°
- Viewing Angle Up: 45°
- Viewing Angle Down: 10°
- Backlight Lifetime (Typical): 50,000 Hrs
SAM – MD302 2-inch Standby Attitude Module
$8,052.00
- Power Input: 10-32 VDC; 6W nominal, 25W max
- Output: ARINC 429 (see manual for specific labels)
- Operating Range:
- Attitude: 300° per second pitch, roll and yaw (max)
- Altitude: -1,500 to +55,000 ft (-457 m to 16,764 m)
- Airspeed: 20 to 500 knots (23 to 575 mph) (37 to 926 kph)
- Vertical Trend: 6 second time frame
- Heading: Displayed via ARINC 429 input (external interface dependent)
- Units of Measure:
- Altitude: Feet or meters
- Barometric Setting: Inches of mercury, millibars
- Airspeed: Knots, miles per hour or kilometers per hour
- Panel Tilt: Configurable: -90° to +90° pitch
- Panel Roll: Configurable: -5° to +5° roll
- Lighting:
- 5, 14 or 28 VDC external input or internal photocell
- Programmable dimming curve
- Pilot Interface: 16-detent, push and turn knob
- Weight: 1.6 lbs (0.73 kg)
- Battery:
- Rechargeable, field-replaceable, internal battery
- Technology: Nanophosphate® lithium-ion
- Run time: 60 minutes minimum when fully charged and properly maintained
- Mounting: Front panel mounted
- Mating Connectors:
- Mid-Continent P/N 9017646 kit contains custom DB15 connector with configuration
- module, pitot and static connectors
- Certification:
- FAA TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- ANAC TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- EASA ETSO certified to C2d, C3d (incomplete), C4c, C10b, C106, C113, C179a
- RTCA DO-178B and DO-254 Design Assurance Level (DAL) A
- RTCA DO-160 and RTCA DO-311 qualified
