EI RS5-2PS – Primary Remote Switch, 4 channel, EGT and CHT
EI RS5-2PS - Primary Remote Switch, 4 channel, EGT and CHT $854.00
Back to products
CHT/EGT Kit Twin
CHT/EGT Kit Twin $806.00

EGT 6 Cylinder, Multi-Cylinder

$806.00

  • Unit Size (H x W x D): 2.5″ x 2.5″ x 2.65″<
  • Unit Weight: 7 oz.
  • Weight – Channel: 1.6 oz for a P-110 EGT Probe & XS-6′ Cable
  • Power Requirements: 7.5 to Volts, 1/10 Amp
  • Display: Viewable in direct sunlight, with dimmable 12 and 24 volt backlight control lines.
  • Accuracy: 1/2%
  • Intensity Control: An external control line allows you to control the Backlight intensity.
  • Probes: Type K Thermocouple, Ungrounded
  • Kit Includes: Instrument, 6 ea. P-110 EGT Probes, 6 ea. XS-6′ Thermocouple Cables, Wire Harness, Installation and Operating Instructions.
Add to compare
Add to wishlist
Category:
Description

EGT 6 Cylinder, Multi-Cylinder

The E-6 provides pilots with Six Channels of Exhaust Gas Temperature readings in a stable, one-degree digital format. The large, crisp LCD is veiwable in direct sunlight and is backlit,making it easy to monitor your EGT. STC’d, TSO’d, PMA’d

  • Unit Size (H x W x D): 2.5″ x 2.5″ x 2.65″<
  • Unit Weight: 7 oz.
  • Weight – Channel: 1.6 oz for a P-110 EGT Probe & XS-6′ Cable
  • Power Requirements: 7.5 to Volts, 1/10 Amp
  • Display: Viewable in direct sunlight, with dimmable 12 and 24 volt backlight control lines.
  • Accuracy: 1/2%
  • Intensity Control: An external control line allows you to control the Backlight intensity.
  • Probes: Type K Thermocouple, Ungrounded
  • Kit Includes: Instrument, 6 ea. P-110 EGT Probes, 6 ea. XS-6′ Thermocouple Cables, Wire Harness, Installation and Operating Instructions.

Related products

Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R 2 Tank, Experimental
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R 2 Tank, Experimental

$5,874.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R/Aux 4 Tank, Experimental
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R/Aux 4 Tank, Experimental

$6,490.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC

$6,319.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, No Tank, Experimental
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, No Tank, Experimental

$6,270.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC

$12,400.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$13,016.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, Tankless, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, Tankless, TSO/STC

$11,660.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Twin Engine Data Monitor 960 System
Add to compare
Quick view
Add to wishlist

Twin Engine Data Monitor 960 System

$11,194.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty