Lighted Electric Horizon Gyro 28 volt, TSO
$1,962.00
Lighted Electric Horizon Gyro 28 volt, TSO
RC Allen Electric Horizon Gyro 26AK/BK Models
This RC Allen Horizon Gyro employs an electrically-driven rotor to sense movement in the roll and pitch axes, and transmits the information to the pilot through a “pictorial” presentation. The airplane symbol is adjustable by a knob at the 6 o’clock position. A “pull to cage” knob is provided to assure immediate alignment & stability whenever power has been applied to gyro.
All models have an AC (brushless) motor with a built-in inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. A power failure flag drops when voltage is lost or has dropped below a level for proper operation. Connector mates with MS3116E8-4S or equivalent. RC Allen gyro horizons can be calibrated at all standard panel tilts. Specify at time of order. Artificial horizon gyro comes standard with color scheme of blue sky reference and brown ground reference.
- Diam: 3 3/8″ x 3 3/8″ x 7″
- 14VDC or 28VDC
- Meets or exceeds requirement of FAA TSO-C4c.
Related products
3″ Mini6 Digital Multifunctional Indicator, 9-32 volt, TSO
- Operating voltage: 9 to 32 VDC
- Circuit breaker: 1 Amp
- Current draw: 0.35 Amp max (14VDC), 0.20 Amp max (28VDC)
- Length: 2.3 in. max
- Width: 3.37 in. max
- Height: 3.37 in. max
- Weight: 8.3 oz. max
- Battery: Rechargeable LiPo (1.85 Wh)
- Max Indicated Airspeed: 300kts
- Vertical speed range: ± 9,000 feet/minute
- Altitude range: -5,000 - +33,000 feet
- TSO-C4C Bank and Pitch Instruments
- TSO-C113a Airborne Multipurpose Electronic Displays
- TSO-C3e Turn and Slip Instrument
- TSO-C6e Direction Instrument, Magnetic (Gyroscopically Stabilized)
- TSO-C2d Airspeed Instruments
- TSO-C10c Pressure Altimeter System
- TSO-C8e Vertical Velocity Instruments (Rate-of-Climb)
- Environmental Certification: (DO-160G)
- Software Certification: (DO-178B)
AV-30-C EFIS Display, FAA-PMA
- Input Power Nominal: 6 Watts (0.5 Amps @ 12VDC)
- Input Power Max: 12 Watts (1.0 Amps @ 12VDC)
- Required Circuit Breaker: 2 Amp
- Operation on Battery: 2 Hours Typ @ 20°C / 30 Minutes Min @ -20C
- Physical Attributes
- Mounting Configuration: 3 1/8” Round Instrument Hole
- Dimensions wo/Connector: 3.38 x 3.38 x 1.6 Inches
- Weight: 0.50 Lbs.
- Electrical Connector: 15 Pin Male D-Sub
- Pneumatic Connectors: ¼" OD Quick Connect
- Mounting: (4X) #6-32 Machine Screws
- Case Material: Billet Aluminum
- Environmental
- Operating Temp: -20°C to +55°C
- Storage Temp (48 Hrs): -30°C to +80°C
- Humidity (48 Hrs): 90% RH
- Display
- Diagonal Size: 3” Circular
- Contrast Ratio (Typical): 500
- Brightness (Typical): 1000 cd/m2
- Viewing Angle Left/Right: 60°
- Viewing Angle Up: 45°
- Viewing Angle Down: 10°
- Backlight Lifetime (Typical): 50,000 Hrs
SAM – MD302 2-inch Standby Attitude Module
- Power Input: 10-32 VDC; 6W nominal, 25W max
- Output: ARINC 429 (see manual for specific labels)
- Operating Range:
- Attitude: 300° per second pitch, roll and yaw (max)
- Altitude: -1,500 to +55,000 ft (-457 m to 16,764 m)
- Airspeed: 20 to 500 knots (23 to 575 mph) (37 to 926 kph)
- Vertical Trend: 6 second time frame
- Heading: Displayed via ARINC 429 input (external interface dependent)
- Units of Measure:
- Altitude: Feet or meters
- Barometric Setting: Inches of mercury, millibars
- Airspeed: Knots, miles per hour or kilometers per hour
- Panel Tilt: Configurable: -90° to +90° pitch
- Panel Roll: Configurable: -5° to +5° roll
- Lighting:
- 5, 14 or 28 VDC external input or internal photocell
- Programmable dimming curve
- Pilot Interface: 16-detent, push and turn knob
- Weight: 1.6 lbs (0.73 kg)
- Battery:
- Rechargeable, field-replaceable, internal battery
- Technology: Nanophosphate® lithium-ion
- Run time: 60 minutes minimum when fully charged and properly maintained
- Mounting: Front panel mounted
- Mating Connectors:
- Mid-Continent P/N 9017646 kit contains custom DB15 connector with configuration
- module, pitot and static connectors
- Certification:
- FAA TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- ANAC TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a
- EASA ETSO certified to C2d, C3d (incomplete), C4c, C10b, C106, C113, C179a
- RTCA DO-178B and DO-254 Design Assurance Level (DAL) A
- RTCA DO-160 and RTCA DO-311 qualified
