Red Strobe Head Assembly
$263.00
- Weight: 0.3 lbs.
- Exposed Height: 3.75″;
- Diameter: 2.50″
Lens material is Lexan.
Needs additional Strobe Power Supply for operation and H102 or H103 mounting adapter.
Description
A470 Red Strobe Head Assembly
The A470 Strobe can be installed on the vertical fin or fuselage. It incorporates a vibration-proof flash tube which allows flush mounting. Available with Aviation Red, Aviation White or Split Aviation Red/White optic lens. When ordering with Aviation Red or split Aviation Red/White lens, the A490A, TS, CF Strobe power supply is required. When ordering with Aviation White lens, the A490, T, CF-14/28 volt may be used. When installing system use special 3 conductor shielded cable between light assembly and power supply.
- Weight: 0.3 lbs.
- Exposed Height: 3.75″;
- Diameter: 2.50″
Lens material is Lexan.
Needs additional Strobe Power Supply for operation and H102 or H103 mounting adapter.
Related products
70509 Series Flashing Beacon
$431.00
71080 Series Red LED Beacon
$649.00
MAXDIM Single Light Intensity Control Unit, with Spade Terminals, by Seaton
$273.00
- Weight: 0.58 oz (16.6 g)
- Dimensions: 1.25" diameter
- Voltage Range: 12 to 35VDC
- Max Current: 12.5 A
- Controlled Output: 0 to 12-35 VDC 0 to 12.5 A
- Capacity:
- 150 watts @ 12 VDC
- 288 watts @ 24 VDC
- 350 watts @ 28 VDC
- 440 watts @ 35 VDC
- Install with standard supplied solderless crimp connectors
- Potentiometer rotation: 270?
- Rotational life: 500K turns
- Operating temperature range: -30° C to +65° C
- Internal temperature protect: +85°C
- Storage temperature: -40° C to +100° C
- Maximum internal temperature: @12.5A +15° C
- Enclosure material: Bayer FR 110 Resin meets UL 94
- Flame rating: V-2 (0.03in) V-0 (0.059in) 5VB (0.098in) 5VA (0.13in)
- RTCA/DO-160E Qualified
- FAA PMA STC SA01800SE
MAXPULSE Landing Light Controller, with spade connectors, by Seaton
$300.00
- Weight: 1 oz
- Diameter: 1.25"
- Voltage range: 12 to 35VDC, up to 700 watts total
- Max current: 10 A per circuit
- Circuits: 2
- Capacity per circuit:
- 120 watts @ 12 VDC
- 240 watts @ 24 VDC
- 280 watts @ 28 VDC
- 350 watts @ 35 VCD
- Installed with standard supplied solderless crimp ring lug terminals
- Operating temperature range: -30° C to +65° C
- Internal temperature protect: +85° C
- Storage temperature: -40° C to +100° C
- Maximum internal temperature: @ 10 A +25° C above ambient
- Enclosure material: Bayer FR110 resin meets UL 94
- Flame rating: V-2 (0.03in) V-0 (0.059in) 5VB (0.098in) 5VA (0.13in)
- Full STC/PMA
- RTCA/DO-160E Qualified
