Engine Instruments
Recently Viewed Products
EI M-1 – Manifold Pressure Functional Mode Gauge
$542.00
Kit Includes: Instrument with internal Manifold Pressure Transducer, Wire Harness, Installation and Operating Instructions
Dimensions: 2.5" x 2.5" x 3.65" Depth, 2.25" Bezel
Display: Large LCD display, viewable in direct sunlight and backlit for night operations, and a 210 degree analog arc with LED's marking each operating zone for quick reference.
Power Requirements: 7.5 to 35 volts at .3 amps
Weight - Instrument: 10 oz.
Accuracy: 2% in accordance with TSO C47/C43a
Resolution: 1 Hg.
EI R-1 Tachometer, for 6 Cylinder Engines
$542.00
- Kit Includes: Instrument, Magneto Isolators, Wire Harness, Installation and Operating Instructions.
- Size (H x W x D): 2.5" x 2.5" x 3.65," with a 2.25" Bezel
- Weight - Instrument: 7 oz.
- Connections: Connects to "P" leads through isolotars (no magnetic pick-ups required).
- Power Requirements: 7.5 to 30 Volts, 1/10 Amp
- Display: Viewable in direct sunlight, with dimmable 12 and 24 volt backlight control lines.
- Accuracy: 1/2%
- Resolution: Stable, 10 RPM Resolution with quick response to engine changes.
- Intensity Control: An intensity control line allows you to control the LED intensity with the use of the EI CP-1 potentiometer dimmer switch.
EI R-1 Tachometer, for 8 Cylinder Engines
$542.00
- Kit Includes: Instrument, Magneto Isolators, Wire Harness, Installation and Operating Instructions.
- Size (H x W x D): 2.5" x 2.5" x 3.65," with a 2.25" Bezel
- Weight - Instrument: 7 oz.
- Connections: Connects to "P" leads through isolotars (no magnetic pick-ups required).
- Power Requirements: 7.5 to 30 Volts, 1/10 Amp
- Display: Viewable in direct sunlight, with dimmable 12 and 24 volt backlight control lines.
- Accuracy: 1/2%
- Resolution: Stable, 10 RPM Resolution with quick response to engine changes.
- Intensity Control: An intensity control line allows you to control the LED intensity with the use of the EI CP-1 potentiometer dimmer switch.
Electronics International CGR-30C STC’d/TSO’d Primary Engine Monitor
$0.00
- Dimensions: 3.25” x 3.25” x 4.45” Depth
- Weight: 1.1 lb
- Environmental: TSO’d to DO-160G
- Software: TSO’d to DO-178B, Level C
- Power Requirements: 7.5 to 30 Volts, 0.1 amps @ 24V (Typical), 0.2 amps @ 12 Volts (Typical)
- USB Port: For USB Memory Stick use only (Not intended to provide power to other electronic devices)
- Display: Active Matrix, 262, 144 colors. Sunlight readable
- Backlight: External Control Line and Internal Electric Eye
- Layout: All CGR orders are layed out by EI’s FAA DER
EDC - Engine Data Converter Specifications
- Dimensions: 5.85” x 3.71” x 2.35” Depth
- Weight: 1 lb
- Environmental: TSO’d DO-160
- Software: TSO’d DO-178B, Level C
- Power Requirements: 7.5 Volts to 30 Volts, 0.1 Amp (Typical)
Electronics International FP-5L Fuel Flow/Horsepower Instrument w/FT-60 Transducer
$527.00
- Dimensions: 2.5" x 2.5" x 3.65" Depth, 2.25" Bezel
- Weight: Instrument Only = 11 oz., Flow Transducer Only = 6 oz.
- Environmental: Meets TSO C44a/C47
- Power Requirements: 7.5 to 35 volts, 1/10 Amp.
- Resolution: .1 psi
- Accuracy: 2% or better in accordance with TSO C47
- PT-30GA: Every Primary FP-5 or FP-5L package comes with a Fuel Pressure Transducer, the PT-30GA.
- Pressure Range: 0 to 40 psi
- Over Pressure: 90 psi without damage
- Min. Burst Pressure: 120 psi.
- Temp Range: -40'C to 125'C
- Material: 316L Stainless Steel
- Pressure Port: 1/8" NPT Male
Electronics International FP-5L Fuel Flow/Horsepower Instrument w/FT-90 Transducer
$527.00
- Dimensions: 2.5" x 2.5" x 3.65" Depth, 2.25" Bezel
- Weight: Instrument Only = 11 oz., Flow Transducer Only = 6 oz.
- Environmental: Meets TSO C44a/C47
- Power Requirements: 7.5 to 35 volts, 1/10 Amp.
- Resolution: .1 psi
- Accuracy: 2% or better in accordance with TSO C47
- PT-30GA: Every Primary FP-5 or FP-5L package comes with a Fuel Pressure Transducer, the PT-30GA.
- Pressure Range: 0 to 40 psi
- Over Pressure: 90 psi without damage
- Min. Burst Pressure: 120 psi.
- Temp Range: -40'C to 125'C
- Material: 316L Stainless Steel
- Pressure Port: 1/8" NPT Male
Electronics International MVP-50 Glass Panel Engine Monitor for 4 cylinder, Experimental
$4,708.00
MVP-50 Display
- Weight:1.9 Lbs.
- Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical).
- USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices)
- Display: Active TFT Matrix, 262,144 colors. Sunlight readable.
- Backlight: External Control Line and Internal Electric Eyes
EDC-33P-4/6
- Weight: 1 Lbs.
- Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).
Inputs
- Volts: Measured on the power lead of the EDC.
- Amps: +/- 2.5V differential input, +/- 90V common mode operating range
- Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz.
- RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup.
- Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts.
- Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V.
- Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms
- Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50 Glass Panel Engine Monitor for 4 cylinder, TSO
$5,500.00
MVP-50 Display
Weight:1.9 Lbs. Environmental: TSO'd to DO-160 Software: TSOd to DO-178B Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical). USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices) Display: Active TFT Matrix, 262,144 colors. Sunlight readable. Backlight: External Control Line and Internal Electric EyesEDC-33P-4/6
Weight: 1 Lbs. Environmental: Meets TSO (DO-160) Software: Designed and documented to TSO (DO-178B) Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).Inputs
Volts: Measured on the power lead of the EDC. Amps: +/- 2.5V differential input, +/- 90V common mode operating range Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz. RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup. Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts. Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V. Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50 Glass Panel Engine Monitor for 6 cylinder, Experimental
$5,104.00
MVP-50 Display
Weight:1.9 Lbs. Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical). USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices) Display: Active TFT Matrix, 262,144 colors. Sunlight readable. Backlight: External Control Line and Internal Electric EyesEDC-33P-4/6
Weight: 1 Lbs. Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).Inputs
Volts: Measured on the power lead of the EDC. Amps: +/- 2.5V differential input, +/- 90V common mode operating range Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz. RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup. Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts. Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V. Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50 Glass Panel Engine Monitor for 6 cylinder, TSO
$5,852.00
MVP-50 Display
Weight:1.9 Lbs. Environmental: TSO'd to DO-160 Software: TSOd to DO-178B Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical). USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices) Display: Active TFT Matrix, 262,144 colors. Sunlight readable. Backlight: External Control Line and Internal Electric EyesEDC-33P-4/6
Weight: 1 Lbs. Environmental: Meets TSO (DO-160) Software: Designed and documented to TSO (DO-178B) Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).Inputs
Volts: Measured on the power lead of the EDC. Amps: +/- 2.5V differential input, +/- 90V common mode operating range Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz. RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup. Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts. Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V. Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50 Glass Panel Twin Engine Monitors for 4 cylinder, TSO
$0.00
MVP-50 Display
Weight:1.9 Lbs. Environmental: TSO'd to DO-160 Software: TSOd to DO-178B Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical). USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices) Display: Active TFT Matrix, 262,144 colors. Sunlight readable. Backlight: External Control Line and Internal Electric EyesEDC-33P-4/6
Weight: 1 Lbs. Environmental: Meets TSO (DO-160) Software: Designed and documented to TSO (DO-178B) Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).Inputs
Volts: Measured on the power lead of the EDC. Amps: +/- 2.5V differential input, +/- 90V common mode operating range Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz. RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup. Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts. Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V. Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50 Glass Panel Twin Engine Monitors for 6 cylinder, TSO
$0.00
MVP-50 Display
Weight:1.9 Lbs. Environmental: TSO'd to DO-160 Software: TSOd to DO-178B Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical). USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices) Display: Active TFT Matrix, 262,144 colors. Sunlight readable. Backlight: External Control Line and Internal Electric EyesEDC-33P-4/6
Weight: 1 Lbs. Environmental: Meets TSO (DO-160) Software: Designed and documented to TSO (DO-178B) Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).Inputs
Volts: Measured on the power lead of the EDC. Amps: +/- 2.5V differential input, +/- 90V common mode operating range Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz. RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup. Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts. Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V. Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms
Electronics International MVP-50T Glass Panel Engine Monitor for Turbo-Prop, TSO/STC
$0.00
MVP-50T
- Dimensions: 5.55″ W x 5.15″ H x 2.4″ D
- Weight: 1.9 lbs
- Environmental: TSO’d to DO-160G
- Software: TSO’d to DO-178B, Level C
- Power Requirements: 7.5 to 30 Volts, 0.1 amps @ 24V (Typical), 0.2 amps @ 12 Volts (Typical)
- USB Port: For USB Memory Stick use only (Not intended to provide power to other electronic devices)
- Display: Active Matrix, 262, 144 colors. Sunlight readable
- Backlight: External Control Line and Internal Electric Eye
- Layout: All MVP orders are layer out by EI’s FAA DER
- Dimensions: 5.85” x 3.71” x 2.35” Depth
- Weight: 1 lb
- Environmental: TSO’d DO-160
- Software: TSO’d DO-178B, Level C
- Power Requirements: 7.5 Volts to 30 Volts, 0.1 Amp (Typical)
Engine Data Monitor 730 System, 4 Cylinder
$1,347.00
EDM-730 Specifications |
|
|
|
Standard Functions of the EDM-730 |
Optional functions of the EDM-730 |
|
|
Engine Data Monitor 730 System, 6 Cylinder
$1,967.00
EDM-730 Specifications |
|
|
|
Standard Functions of the EDM-730 |
Optional functions of the EDM-730 |
|
|
The Most Trusted Names in Aviation, Available Now
Thank you for browsing the comprehensive selection at Jet Aviation Spare Parts. We pride ourselves on stocking the most critical components for pilots and mechanics across the USA. If you are planning a panel upgrade, explore our full range of Dynon Avionics and LoneStar Aviation accessories. Need new communication gear? Compare the premium Bose Aviation Headsets against top-tier models from David Clark and Lightspeed ANR Headsets. We carry all required engine instruments, certified transceivers & radios, and innovative uAvionix ADS-B UAT solutions to keep you flying safely and compliantly. Shop confidently with fast, USA shipping on all aircraft lighting systems and pilot supplies.
Didn't find what you were looking for? Contact our certified parts specialists for assistance.