Aircraft

Showing 141–160 of 248 results

Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, Tankless, TSO/STC

$6,064.00
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 930 System, 7 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$6,314.00
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 930 System, 8 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$6,504.00
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 930 System, 9 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC, Includes a High Flow Fuel Transducer to 125 GPH

$6,944.00
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 4 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC

$11,194.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 4 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$12,100.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC

$12,400.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$13,016.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, Tankless, TSO/STC

$11,660.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System, 7 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$12,980.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

Engine Data Monitor 960 System0, 4 Cylinder Complete Primary Package, Tankless, TSO/STC

$10,728.00
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty

ESP Battery Backup

$765.00
BATTERY POWER UNIT
  • Voltage In: 14 or 28VDC
  • Voltage Out: 14 or 28VDC
  • Circuit Breaker Size.: 8 Volt load..2 AMP
  • 14 Volt load: 3 AMP
  • Weight: 12.5 ounces
  • Dimensions: See PDF
  • Operating Temperature Range: -30º to +50º C
  • Location: Inside cabin bulkhead
BATTERY
  • Nominal Voltage: 14/28VDC
  • Battery Type: 7.4VDC, 2300 mAh Li-PO Lithium Polymer
ILLUMINATED STATUS SWITCH
  • Light Source: 2 LED lights
  • Dimensions: 0.70 x 0.70 inches
  • Location: Panel mounted
  • Panel Hole: 5/8 inch diameter
PERFORMANCE
  • Rated Capacity Mechanical Instrument: 60 Minutes
  • Electronic Instrument: 6+ Hours
  • Maintenance: Replace battery every 3 years
QUALIFICATIONS
  • Minimum Performance Standard: FAA TSO-C179
  • Environmental Qualification: DO-160F
  • Env. Cat. [D1X]CAA[SM]XXXXXXZ[BRX]AZZC[WW]L[A3C3X]XXAX

FS-450 Fuel Flow, Fuel Injected or Engine Driven Fuel Pump

$519.00
Fuel Scan FS-450 Fuel Injected or Engine Driven Fuel Pump With GPS interface, FlowScan Transducer and Fire sleeve Purchase fittings

FS-450 Fuel Flow, Gravity flow (No fuel Pump)

$519.00
Fuel Scan FS-450 All gravity Flow installations without fuel pump With GPS interface, FlowScan Transducer and Fire sleeve Purchase fittings

FS-450 Fuel Flow, Twin

$920.00
Fuel Scan FS-450 Twin, Single Display w/ two transducers With GPS interface, FlowScan Transducer and Fire sleeve Purchase fittings separately

Fuel Flow option for EDM-730, With 201 transducer, Harness included

$436.00
Fuel Flow option for EDM-730, With 201 transducer, Harness included JP Instruments Fuel Flow Transducer Model 201B-9 (old264) Not compatible

Fuel Flow option for EDM-730, With 231 transducer, Harness included

$436.00
Fuel Flow option for EDM-730, With 231 transducer, Harness included JP Instruments Fuel Flow Transducer Model 231 Not compatible with

Fuel Flow option for EDM-760/790, With (2) 201 transducers, Harness included

$924.00
Fuel Flow option for EDM-760/790, With (2) 201 transducers, Harness included Most JP Instruments EDM options can be added at

Fuel Flow option for EDM-760/790, With (2) 231 transducers, Harness included

$924.00
Fuel Flow option for EDM-760/790, With (2) 231 transducers, Harness included Most JP Instruments EDM options can be added at

The Most Trusted Names in Aviation, Available Now

Thank you for browsing the comprehensive selection at Jet Aviation Spare Parts. We pride ourselves on stocking the most critical components for pilots and mechanics across the USA. If you are planning a panel upgrade, explore our full range of Dynon Avionics and LoneStar Aviation accessories. Need new communication gear? Compare the premium Bose Aviation Headsets against top-tier models from David Clark and Lightspeed ANR Headsets. We carry all required engine instruments, certified transceivers & radios, and innovative uAvionix ADS-B UAT solutions to keep you flying safely and compliantly. Shop confidently with fast, USA shipping on all aircraft lighting systems and pilot supplies.

Didn't find what you were looking for? Contact our certified parts specialists for assistance.