3 1/8″ Electric Analog Tachometer, Range: 0-3500 RPM, UMA
TSO’d tach generator and 6′ harness
Custom Range Mark Versions Available – Call with Range Mark Specifications.
Owners of Lycoming and Continental powered airplanes now have an electronic, analog alternative to the old cable driven tachometer. UMA Inc. of Dayton, VA has developed a highly accurate electronic replacement for the old steamgauge tach found in most aircraft. The system uses a tach sender mounted on the engine in place of the mechanical cable and is connected to the indicator with a single, 3-conductor cable.
The 3 1/8″ indicator utilizes a high torque pivot and jewel movement. The hour meter can be factory set to start at any desired RPM point. This unit gives the pilot the analog display that is easiest to scan and provides electronic accuracy and ease of installation. Custom dial markings in color are available at extra cost.
Related products
Engine Data Monitor 900 System, 9 Cylinder Complete Primary Package, L/R/Aux 4 tank, TSO/STC
- Dimensions: 4.53 x 3.32, 0.5 deep
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGT’s
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, Experimental
- Dimensions: 5.97 x 5.11, 2.99 deep
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGTs
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-930 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
Engine Data Monitor 930 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC
- Dimensions: 5.97 x 5.11, 2.99 deep
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGTs
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-930 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
Engine Data Monitor 930 System, 7 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC
- Dimensions: 5.97 x 5.11, 2.99 deep
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGTs
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-930 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
Engine Data Monitor 930 System, 9 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC, Includes a High Flow Fuel Transducer to 125 GPH
- Dimensions: 5.97 x 5.11, 2.99 deep
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGTs
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-930 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
Engine Data Monitor 960 System0, 4 Cylinder Complete Primary Package, Tankless, TSO/STC
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGT’s
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-960 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
Twin Engine Data Monitor 960 System
- Pre-Wired Harness for all functions
- Display SVGA
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour GPH
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGT’s
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
- 3 year Warranty
- EDM-960 ALL IN ONE Bright VGA Display
- Pre-Wired Harness for all functions
- All EGT/ CHT probes
- Oil Pressure Transducer
- Oil Temperature Sensor
- Fuel Pressure Transducer
- Oat Sensor
- RPM Sensor, One required
- Manifold Pressure Transducer
- 100 amp Shunt (2)(for Amps)
- Volts pick-up V-1 and V-2
- 2 GB memory Download/upload stick
- FloScan Fuel Flow Transducer w/firesleeve
- Demo DVD
- 3 year Warranty
