H10-13H Helicopter Headset
$343.00
Description
David Clark H10-13H Helicopter Headset
- Helicopter headset with 5 ft coiled cord & U-174/U Plug
- Extremely light-weight headset at only 13.4 oz.
- Certified Noise Reduction Rating of 23 dB.
Drastically reduced headband force, Super soft foam filled pillow headpad and Flo-Fit Gel ear seals make this headset one of the most comfortable headsets available.
Has straight 5 ft cord, universal flex boom and M-7A Amplified Electret noise cancelling microphone.
5 year factory warranty.
Related products
David Clark ONE-X Hybrid ENC Headset
$876.00
- Ear coupling: Around-the-ear (Circumaural)
- Hardware: Lightweight Alloy
- Connector Type: Standard dual GA plugs or 6-Pin Redel Plug for panel DC Power & intercom connections
- Connection Cable: 0.155” (4-mm) OD shielded
- cable length: ~ 6 ft. (1.8 m)
- Weight w/o cable: ~ 12.3 oz. (349 g)
- Battery life: Up to 50 hours (2 AA batteries)
- Operating temperature: -20°C to +70°C
- Operating voltage: 11 - 30 VDC or 3VDC (2x AA)
- Dome type: ABS
- Characteristic SPL: ~95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
- Contact pressure: ~1.4 lb. (6.2 N)
- ENC peak attenuation: 30dB @ 150Hz
- ENC attenuation range: 20Hz―1KHz
- Total harmonic distortion (THD): < 1% - 110 dB SPL (300 - 3,000 Hz)
- Ear Transducer principle: Dynamic
- Ear Impedance: 150 Ω mono / 300 Ω stereo (each ear)
- Ear Freq Response: 12 - 15,000 Hz
- Microphone principle: pre-polarized condenser microphone (electret), noise cancelling
- Mic Impedance: 150Ω nominal
- Mic Sensitivity: 400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
- Mic Freq Response: 150 - 8,000 Hz
- Mic DC Supply V.: 8-16V, not polarity sensitive
- Source Resistance: 470Ω
H10-20 Standard Aviation Headset
$316.00
H10-30 Headset, Dynamic Mic
$264.00
