Fuel Level Kit, for 24V system with resistive senders
Fuel Level Kit, for 24V system with resistive senders $506.00
Back to products
CHT/EGT Kit Single
CHT/EGT Kit Single $462.00

Primary Float Type Replacement Fuel Probe

$462.00

Add to compare
Add to wishlist
Category:
Description

Primary Float Type Replacement Fuel Probe

  • FAA TSO’d to replace a resistive sensor.
  • Works off of magnetics, not affected by vibration, corrosion, wear, varnish.
  • Only works with EI Instruments.
  • Typical Weight: 5.3 Oz

Related products

CGR-30P 6-Cylinder Primary Twin Engine Monitors, Premium (2 Monitors) w/RPM, EGT/CHT & 10 Functions
Add to compare
Quick view
Add to wishlist

CGR-30P 6-Cylinder Primary Twin Engine Monitors, Premium (2 Monitors) w/RPM, EGT/CHT & 10 Functions

$7,919.00
Add to cart
  • Models: CGR-30P
  • FAA Certifications: STC’d, PMA’d and TSO’d
  • Weight: 1.1 Lbs
  • Environmental: Designed and Tested to TSO (DO-160G)
  • Software: Designed and Documented to TSO (DO-178B, Level C)
  • Minimum Performance Standards: TSO-C43c, TSO-C44c, TSO-C45b, TSO-C47a, TSO-C48a, TSO-49b and TSO-C55a
  • Power Requirements: 7.5 to 30 Volts, 0.1 amps @ 24V (Typ), 0.2 amps @ 12 Volts (Typ)
  • USB Port: For USB Memory Stick use only
  • Display: Active Matrix TFT, 262,144 colors, Sunlight readable
  • Backlight: External control line, programmable levels
  • Display of Primary Gauges with Red and/or Yellow Ranges: Five on the Main Screen + EGT and CHT, One on the Secondary Screen
  • Display of Primary and Non-Primary Gauges without Red and/or Yellow Ranges: Five on the Main Screen + EGT and CHT, Six on the Secondary Screen
Electronics International MVP-50T Glass Panel Engine Monitor for Turbo-Prop, TSO/STC
Add to compare
Quick view
Add to wishlist

Electronics International MVP-50T Glass Panel Engine Monitor for Turbo-Prop, TSO/STC

$0.00
Add to cart
MVP-50T
  • Dimensions: 5.55″ W x 5.15″ H x 2.4″ D
  • Weight: 1.9 lbs
  • Environmental: TSO’d to DO-160G
  • Software: TSO’d to DO-178B, Level C
  • Power Requirements: 7.5 to 30 Volts, 0.1 amps @ 24V (Typical), 0.2 amps @ 12 Volts (Typical)
  • USB Port: For USB Memory Stick use only (Not intended to provide power to other electronic devices)
  • Display: Active Matrix, 262, 144 colors. Sunlight readable
  • Backlight: External Control Line and Internal Electric Eye
  • Layout: All MVP orders are layer out by EI’s FAA DER
Engine Data Converter (EDC)
  • Dimensions: 5.85” x 3.71” x 2.35” Depth
  • Weight: 1 lb
  • Environmental: TSO’d DO-160
  • Software: TSO’d DO-178B, Level C
  • Power Requirements: 7.5 Volts to 30 Volts, 0.1 Amp (Typical)
Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R 2 Tank, Experimental
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 4 Cylinder Complete Primary Package, L/R 2 Tank, Experimental

$5,874.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 7 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 7 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$6,314.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 8 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 8 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$6,504.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 930 System, 9 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC, Includes a High Flow Fuel Transducer to 125 GPH
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 930 System, 9 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC, Includes a High Flow Fuel Transducer to 125 GPH

$6,944.00
Add to cart
  • Dimensions: 5.97 x 5.11, 2.99 deep
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGTs
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 930 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-930 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R 2 Tank, TSO/STC

$12,400.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty
Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC
Add to compare
Quick view
Add to wishlist

Engine Data Monitor 960 System, 6 Cylinder Complete Primary Package, L/R/Aux 4 Tank, TSO/STC

$13,016.00
Add to cart
  • Pre-Wired Harness for all functions
  • Display SVGA
  • RPM Prop
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp.
  • CHT Cylinder Head Temp.
  • EGT Normalize mode
  • LOP/ROP JPI Exclusive Leaning Mode
  • O-T Oil Temperature
  • O-P Oil Pressure
  • F-P Fuel Pressure (when in POH)
  • OAT Outside Air Temp.
  • VDC Voltage (1)
  • AMP Current amps (2 twins)
  • Fuel Flow Transducer FlowScan
  • GPH Gallons per Hour GPH
  • REQ Required to wp or destination
  • USD Fuel used
  • H:M Endurance Hours and Minutes
  • MPG Miles per Gal
  • CLD Shock Cooling on ALL cylinders
  • DIFF Difference between EGT’s
  • USB Memory stick 1 GB
  • Data Recording 800 Hrs every 6 sec.
  • EZTrends Graphing Software free
  • 3 year Warranty
The EDM 960 is a self contained instrument. All functions or channels on the EDM are recorded at an adjustable rate of every 2 to 60 seconds per recording. The EDM-930 is sold in several versions.The display is a TFT, full VGA not 1/4 VGA display. This type of display permits a lot of latitude in placing the gages on the screen. The EDM-930 is sold in several versions.
  • EDM-960 ALL IN ONE Bright VGA Display
  • Pre-Wired Harness for all functions
  • All EGT/ CHT probes
  • Oil Pressure Transducer
  • Oil Temperature Sensor
  • Fuel Pressure Transducer
  • Oat Sensor
  • RPM Sensor, One required
  • Manifold Pressure Transducer
  • 100 amp Shunt (2)(for Amps)
  • Volts pick-up V-1 and V-2
  • 2 GB memory Download/upload stick
  • FloScan Fuel Flow Transducer w/firesleeve
  • Demo DVD
  • 3 year Warranty