SkyView WAAS GPS Antenna/Receiver Module
$823.00
- WAAS GPS Receiver Size: 2.19” W x 0.75” H x 3.44” D
- Weight: 7 oz
- Maximum Velocity: 400 knots
- Update Rate: 4 Hz
- Temperature: Storage -40 °C to +70 °C; Operating -30 °C to +60 °C
- Source Integrity Level (SIL): 3
- Interface: 115,200 baud RS-232 NMEA Output w/ integrity data
- Transponder Compatibility: SV-XPNDR-261
SkyView WAAS GPS Antenna/Receiver Module
The SV-GPS-2020 GPS Receiver/Antenna from Dynon Avionics allows existing and new SkyView and Advanced AF-5000 series customers to add a 2020-compliant GPS position for ADS-B Out. As a drop-in replacement for the existing SV-GPS-250 receiver, existing customers do not need to run any additional wires, coax, or install any new boxes in their aircraft. When combined with Dynon’s SV-XPNDR-261 Mode-S transponder, SkyView and Advanced Flight Systems customers meet all the transponder and ADS-B Out requirements. Pilots can also add the SV-ADSB-470 Traffic and Weather Receiver for the best possible situational awareness in their aircraft.
The SV-GPS-2020 is limited to ground speeds of 400 knots and below. To meet the integrity level required for an ADS-B position source, the SV-GPS-2020 needs a stronger GPS signal than the SV-GPS-250 and may not work acceptably unless mounted on the outside of the aircraft.
Along with the SV-GPS-2020, what else do I need for a 2020-compliant system?
You’ll need a SkyView or AF-5000 system equipped with an SV-XPNDR-261 Mode-S Transponder. ADS-B In capability (traffic and weather reception in the aircraft) is not required, so the SV-ADSB-470 traffic and weather receiver is not required for compliance. However, you will want it to receive traffic and weather.
How does the SV-GPS-2020 connect?
The SV-GPS-2020 connects using four wires (two serial, power, and ground).
What is the difference between the SV-GPS-250 and the SV-GPS-2020?
Both are WAAS GPS receivers that update position at 4-5Hz. The SV-GPS-250’s design utilizes high volume commercial GPS components that yield a lower price point ($200). However, this design does not have the documented design data and integrity checking necessary to prove it meets the FAA’s 2020 performance requirements. The SV-GPS-2020 has the design data demonstrating that it meets the FAR performance requirements.
- WAAS GPS Receiver Size: 2.19” W x 0.75” H x 3.44” D
- Weight: 7 oz
- Maximum Velocity: 400 knots
- Update Rate: 4 Hz
- Temperature: Storage -40 °C to +70 °C; Operating -30 °C to +60 °C
- Source Integrity Level (SIL): 3
- Interface: 115,200 baud RS-232 NMEA Output w/ integrity data
- Transponder Compatibility: SV-XPNDR-261
Related products
EMSKIT-J22 Jabiru 2200 Kavlico Probe Kit
The Jabiru 2200 is an Australian-designed, 4-cylinder horizontally opposed aircraft engine used extensively in Light Sport Aircraft (LSA), ultralights, and experimental homebuilt aircraft such as the Jabiru J160, Zenith CH 601, and various Van's RV variants where builders have chosen the 2200 powerplant.
The EMSKIT-J22 is the purpose-built Kavlico sensor bundle for this engine — removing the challenge of sourcing compatible probes from multiple vendors and ensuring that sensor ratings match the Jabiru 2200's specific operating parameters.
EMSKIT-L6F Fuel Injected 6 Cylinder Lycoming/Continental Kavlico Kit
The EMSKIT-L6F is a pre-configured engine monitoring sensor kit engineered specifically for fuel-injected 6-cylinder Lycoming and Continental engines — the powerplants found in Beechcraft Bonanza, Cessna 210, Piper Comanche, Cirrus SR22, and many other high-performance general aviation aircraft.
This kit uses Kavlico sensors, widely regarded as the gold standard for aviation EMS probes thanks to their precision calibration, FAA-recognized accuracy, and long-term reliability in high-vibration engine environments. Rather than sourcing probes individually, the EMSKIT-L6F delivers everything you need in a single, verified bundle — reducing installation time and eliminating compatibility guesswork.
SkyView 25kHz VHF COM Transceiver, 12V only
- Frequencies: SV-COM-760: 118.000 to 136.975 MHz, 25 kHz Spacing
- Control Panels: 3.53” (89.7mm) x 1.80” (45.7mm) x 1.27” (32.4mm), available in vertical and horizontal versions
- SV-COM-760 Transceiver Module: 7.96" W x 1.02" H x 3.50 D" (202.2mm W x 25.9mm H x 88.9mm D)
- Weight: Control Panel: 5.6 oz (159 g)
- SV-COM-760 Transceiver Module: 0.56 lb. (0.25 kg)
- Power Input: 10-15VDC
- Transmit Power: 6 Watts
- Antenna Connection: BNC
