SkyView XPNDR-261 Mode-S Transponder
$2,196.00
SkyView XPNDR-261 Mode-S Transponder
Integrated: Made for the SkyView System with control and annunciation appearing on the SkyView Display. The transponder module can be mounted anywhere in the airplane that is convenient.
Traffic: Features TIS Traffic (USA).
Meets USA and Europe ADS-B Out Mandates: Note, full ADS-B Out compliance requires a TSO-C146A GPS (WAAS) to be connected.
NOTE ON U.S. COMPLIANCE: Currently the FAA ADS-B requirements specify the higher power Class 1 transponder. For U.S. customers, we recommend only the Class 1 SV-XPNDR-261.
Dynon Warranty, Support, and Service: These transponders come with a 3-year Dynon Warranty.
Mounting: At only 1 pound and 5.6” by 1.8” by 2.4”, the transponder module can fit into the tiniest places and aircraft. A quick release mounting system allows for simple installation and easy removal if needed for service.
Connections: The SV-XPNDR-26X connects to a serial data line on each SkyView Display.
Mechanical Dimensions: The display mechanical drawings can be downloaded here: SV-XPNDR-26X Mechanical Drawing
| SPECIFICATIONS | SV-XPNDR-261 For High Performance Aircraft and ALL US Aircraft |
SV-XPNDR-262 For <15,000 feet, <175 knots Not for US |
| Type | Class 1 Mode S | Class 2 Mode S |
| Certification | ETSO 2C112b, C166a and TSO C112c, C166a, approved for IFR and VFR flight |
|
| Compliance | ED-73B, ED-14F/DO-160F, DO-178B, DO-254 level C, DO-260A class BO, DO-181C |
|
| Supply Voltage (DC) | 9 – 33 V | |
| Power Consumption | 6 Watts (typical) (idle:0.15 A, active:0.34 A at14 V) |
5 Watts (typical) (idle:0.15 A, active:0.28 A at 14 V) |
| Transmitter Power | 250 W nominal at connector | 130 W nominal at connector |
| Operating Temperature | -40deg F to +158deg F (-40deg C to + 70deg C) | |
| Cooling Requirement | No fan required | |
| Weight | 0.9 Lb. (400 g) | |
| Dimensions | 2.4” x 1.8” x 5.6” (62 x 45 x 141 mm) | |
Related products
EMSKIT-J22 Jabiru 2200 Kavlico Probe Kit
The Jabiru 2200 is an Australian-designed, 4-cylinder horizontally opposed aircraft engine used extensively in Light Sport Aircraft (LSA), ultralights, and experimental homebuilt aircraft such as the Jabiru J160, Zenith CH 601, and various Van's RV variants where builders have chosen the 2200 powerplant.
The EMSKIT-J22 is the purpose-built Kavlico sensor bundle for this engine — removing the challenge of sourcing compatible probes from multiple vendors and ensuring that sensor ratings match the Jabiru 2200's specific operating parameters.
EMSKIT-L6F Fuel Injected 6 Cylinder Lycoming/Continental Kavlico Kit
The EMSKIT-L6F is a pre-configured engine monitoring sensor kit engineered specifically for fuel-injected 6-cylinder Lycoming and Continental engines — the powerplants found in Beechcraft Bonanza, Cessna 210, Piper Comanche, Cirrus SR22, and many other high-performance general aviation aircraft.
This kit uses Kavlico sensors, widely regarded as the gold standard for aviation EMS probes thanks to their precision calibration, FAA-recognized accuracy, and long-term reliability in high-vibration engine environments. Rather than sourcing probes individually, the EMSKIT-L6F delivers everything you need in a single, verified bundle — reducing installation time and eliminating compatibility guesswork.
