EMSKIT-J33 Jabiru 3300 Kavlico Probe Kit
$986.00
EMSKIT-J33 Jabiru 3300 Kavlico Solid-State Kit, Includes All Sensors & Harnesses
Dynon has switched their source of engine pressure sensors to solid-state Kavlico sensors starting January 2, 2012. Kavlico is a US company that has been making high quality sensors for over 50 years, and is well known in the aviation industry.
Engine sensor kits will include these new solid-state sensors, and we have optimized the sensor ranges to better match engine pressure ranges offering greater resolution and accuracy. (The older sensors and kits are still available if needed.)
These solid-state sensors do require different wiring, with a third wire needed for 5-volt power. The Kavlico Pressure Sensors:
- All sensors are threaded 1/8-27 NPT.
- All sensors may be used for any liquid.
- The following shows the most common usage.
| EMSKIT- | |||||||
| Item | L4C | L4F | L6C | L6F | RTX | J22 | J33 |
| Engine Sensors | |||||||
| EGT, Hose Clamp 1.00-1.75”, Jabiru | 4 | 6 | |||||
| EGT, Hose Clamp 1.00– 2.25” | 4 | 4 | 6 | 6 | |||
| CHT, Bayonet 3/8-24 UNF | 4 | 4 | 6 | 6 | |||
| CHT, 12 mm Ring Terminal | 4 | 6 | |||||
| MAP , 0-60 In Hg, 1/8” hose) | 1 | 1 | 1 | 1 | 1 | ||
| Oil Pressure, 1/8-27 NPT, 0-150 PSI | 1 | 1 | 1 | 1 | |||
| Oil Temperature, 5/8-18 UNF | 1 | 1 | 1 | 1 | |||
| Fuel Pressure, 1/8-27 NPT, 0-30 PSI, Carbureted | 1 | 1 | 1 | 1 | 1 | ||
| Fuel Pressure, 1/8-27 NPT, 0-80 PSI, Fuel Injected | 1 | 1 | |||||
| Carb Air Temperature, ¼-28 UNF , -50º to 150º | 1 | 1 | |||||
| Amps Shunt, 0 – 60 Amps | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Wiring/Harnesses | |||||||
| EGT, 2 cylinder, 6′ long | 1 | ||||||
| EGT/CHT, 4 cylinder, 6′ long harness | 1 | 1 | 1 | ||||
| EGT/CHT, 6 cylinder, 6′ long harness | 1 | 1 | 1 | ||||
| Engine sensor main wire harness | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Notes | A | B | B | ||||
| A) Uses CHTs, Oil Temperature, Oil Pressure and RPM sensors supplied with the engine B) Uses Oil Pressure and Oil Temperature sensors supplied with the engine C) OAT Probes are included with SkyView SV-ADAHRS-200/201. They should be ordered separately for D10/D100 Series EFIS and EMS instruments. |
|||||||
Related products
EMSKIT-L6F Fuel Injected 6 Cylinder Lycoming/Continental Kavlico Kit
The EMSKIT-L6F is a pre-configured engine monitoring sensor kit engineered specifically for fuel-injected 6-cylinder Lycoming and Continental engines — the powerplants found in Beechcraft Bonanza, Cessna 210, Piper Comanche, Cirrus SR22, and many other high-performance general aviation aircraft.
This kit uses Kavlico sensors, widely regarded as the gold standard for aviation EMS probes thanks to their precision calibration, FAA-recognized accuracy, and long-term reliability in high-vibration engine environments. Rather than sourcing probes individually, the EMSKIT-L6F delivers everything you need in a single, verified bundle — reducing installation time and eliminating compatibility guesswork.
SkyView WAAS GPS Antenna/Receiver Module
- WAAS GPS Receiver Size: 2.19” W x 0.75” H x 3.44” D
- Weight: 7 oz
- Maximum Velocity: 400 knots
- Update Rate: 4 Hz
- Temperature: Storage -40 °C to +70 °C; Operating -30 °C to +60 °C
- Source Integrity Level (SIL): 3
- Interface: 115,200 baud RS-232 NMEA Output w/ integrity data
- Transponder Compatibility: SV-XPNDR-261
