SkyView 25kHz VHF COM Transceiver, 12V only
$713.00
- Frequencies: SV-COM-760: 118.000 to 136.975 MHz, 25 kHz Spacing
- Control Panels: 3.53” (89.7mm) x 1.80” (45.7mm) x 1.27” (32.4mm), available in vertical and horizontal versions
- SV-COM-760 Transceiver Module: 7.96″ W x 1.02″ H x 3.50 D” (202.2mm W x 25.9mm H x 88.9mm D)
- Weight: Control Panel: 5.6 oz (159 g)
- SV-COM-760 Transceiver Module: 0.56 lb. (0.25 kg)
- Power Input: 10-15VDC
- Transmit Power: 6 Watts
- Antenna Connection: BNC
SkyView 25kHz VHF COM Transceiver, 12V only
Includes 2 x Connector Kit: Female, D-sub 25-pin, P/N 100831-001
p>The SkyView COM Radio will change the way you use an aircraft radio. By integrating deeply with your Dynon SkyView system, the SkyView COM Radio tunes frequencies by airport and station type – rather than by spinning in a number – at the touch of a button. You can also send frequencies over from the SkyView map airport info pages. For when you’re feeling nostalgic (or are following ATC instructions), a dual concentric knob lets you spin in frequencies “the old fashioned way.” SkyView will identify the airport and station type as you tune to help ensure you’re talking to the right radio station.
Don’t Miss a Thing: Dual watch allows you to listen for transmissions on both your active and standby frequencies simultaneously, with the active taking priority at all times. Use dual watch to monitor an alternate frequency in busy airspace or listen to ATIS without missing anything on the active.
- Tune frequencies by airport and station type at the touch of a button
- Send frequencies directly from SkyView
- GPS-based reverse lookup of airport and station type for manually entered frequencies
- Vertical and horizontal versions
- Monitor your standby frequency with dual watch
- Fully backlit, auto-dimming controls
- One-touch flip-flop with remote trigger ability
- Transmit indicator
- Receive indicator with active/standby differentiation
- Stuck mic indicator with transmit time-out
Note: This product is not compatible with the SkyView COM/XPNDR Module Mounting Tray Kit.
- Frequencies: SV-COM-760: 118.000 to 136.975 MHz, 25 kHz Spacing
- Control Panels: 3.53” (89.7mm) x 1.80” (45.7mm) x 1.27” (32.4mm), available in vertical and horizontal versions
- SV-COM-760 Transceiver Module: 7.96″ W x 1.02″ H x 3.50 D” (202.2mm W x 25.9mm H x 88.9mm D)
- Weight: Control Panel: 5.6 oz (159 g)
- SV-COM-760 Transceiver Module: 0.56 lb. (0.25 kg)
- Power Input: 10-15VDC
- Transmit Power: 6 Watts
- Antenna Connection: BNC
Related products
EMSKIT-L6F Fuel Injected 6 Cylinder Lycoming/Continental Kavlico Kit
The EMSKIT-L6F is a pre-configured engine monitoring sensor kit engineered specifically for fuel-injected 6-cylinder Lycoming and Continental engines — the powerplants found in Beechcraft Bonanza, Cessna 210, Piper Comanche, Cirrus SR22, and many other high-performance general aviation aircraft.
This kit uses Kavlico sensors, widely regarded as the gold standard for aviation EMS probes thanks to their precision calibration, FAA-recognized accuracy, and long-term reliability in high-vibration engine environments. Rather than sourcing probes individually, the EMSKIT-L6F delivers everything you need in a single, verified bundle — reducing installation time and eliminating compatibility guesswork.
